MS881 modified silicone structural adhesive is a two-component, neutral adhesive, room temperature curing, high elasticity, high modulus MS sealant. It has good adhesion and weathering resistance, and the curing speed can be adjusted.
Product Description:
This product is a two-component, neutral glue, room temperature curing, high elasticity, high modulus MS sealant. It has good adhesion and weathering resistance, and the curing speed can be adjusted. To
Features:
◆Neutral glue, no pollution to the environment
◆High elasticity, high modulus, high strength
◆Excellent high and low temperature resistance and weathering resistance
◆Quick curing, no corrosion to the surface to be adhered
◆It has good adhesion to most building materials without primer
The main purpose:
◆Structural assembly of hidden frame curtain wall
◆Structural curtain wall assembled in the factory
◆Installation and sealing of wind pressure resistant glass for automobiles and ships.
The product complies with GB16776/ASTM C920 standard
Instructions:
Surface cleaning:
In order to ensure that the structural sealant has good adhesion, the surface of the adhered material must be clean, dry and free of dirt. In order to prevent the sealant from polluting the periphery of the joints during construction, protective tape must be used to protect it. After the construction is completed, remove it.
Cleaning process:
A clean, lint-free white cloth must be used. The solvent can be absolute ethanol, acetone, xylene, etc., and the "double-cloth wiping method" is adopted.
1. Wipe the adhered area with a clean, lint-free white cloth soaked in a solvent;
2. Immediately before the solvent evaporates, wipe it off the surface with a second dry, clean, lint-free white cloth;
3. The cleaned area must be completed within 1 hour, otherwise it will be cleaned again;
4. Open flames are strictly prohibited in areas where solvents are used. And maintain good ventilation.
Construction glue:
R881 should be mixed in a closed mixing glue machine system. The mass ratio of components A and B is A:B=11-14:1. The user can change the mixing ratio to adjust the curing speed according to actual needs.
Use restrictions:
R881 should not be used under the following conditions:
◆All materials that will ooze oil stains, plasticizers, and solvents
◆Vulcanized or semi-vulcanized rubber
◆Interface that bears the structural strength on the ground
◆Places subject to excessive friction and physical damage
◆Frosted or wet surface
Precautions:
◆Before use, please do a cohesive test and refer to our company's technical data.
◆B component can react with water in the air. Do not expose to the air for a long time.
◆If the layering of component B is normal, just stir evenly before use.
◆If it gets into the eyes accidentally during use. Should be rinsed immediately with water.
◆Do not contact with the skin for a long time, and avoid contact with children.
◆Do not contaminate food, medicine, etc.
Safety instructions:
Please follow the requirements of JG102 in "Technical Scope of Glass Curtain Wall Engineering". Before operation, you should carefully read the "Construction Scope of Silicone Structural Sealant" and the product manual, and contact our sales company for these materials. Especially for chrome-plated surface bonding, you must contact the company's technical department before use, and then use it after safety testing.
Packing specification:
The A component and the B component are supplied with a 12:1 mass ratio.
Vat: A component 200L iron drum, inner diameter (567+2) mm
20L plastic bucket of component B Inner diameter (285+2) mm
Middle barrel: A 20L plastic barrel
300ml plastic bucket of component B
Storage:
Store in a cool, ventilated, dry place below 28°C. The storage period is 12 months.
